Microengineering of Metals and Ceramics, Part I: Design, Tooling, and Injection Molding

The gateway to the micro and nano worlds: AMN provides cutting–edge reviews and detailed case studies by top authors from science and industry, covering technologies, devices and advanced systems. Together, these have an immense innovative application potential that opens up with control of shape and function from the atomic level right up to the visible world without any technological gaps.
This and the following volume cover all angles of micro–scale parts and components engineering from both metallic and ceramic materials, a very promising field which is a strong source of innovation and development for micro process technology, aerospace applications, sensors, actors, medical and dental as well as many other applications.
In this volume, readers are introduced to this field and led from the design and modeling aspects to tooling, molds, and micro injection molding as a powerful replication technology.
From the Contents:
Design Environment and Design Flow
Modelling in Design
Modelling in Micro–PIM
Strategies for Manufacture of Mold Inserts
Micro End Milling in Hardened Steel
3D Microstructuring of Mold Inserts by Laser Removal
Micro–EDM of Mold Inserts
Lithographic Fabrication of Mold Inserts
Material States, Surface Conditioning
Micro Injection Molding: Principles and Challenges
Micro–MIM
Micro–CIM
Part II covers casting and forming techniques, automation, quality assurance, and component properties.

Spis treści:
Preface.
Foreword.
List of Contributors.
I: Design.
1. Design Environment and Design Flow (A. Albers, J. Marz).
2. Modeling and Validation in Design (A. Albers, D. Metz).
3. Modeling Micro PIM (D. Kauzlaric, A. Greiner, J.G. Korvink, M. Schulz, R. Heldele).
II: Tooling.
4. Strategies for the Manufacture of Mold Inserts (J. Fleischer, C. Buchholz, J. Kotschenreuther).
5. Micro End Milling of Hardened Steel (J . Schmidt, J. Kotschenreuther).
6. 3D Microstructuring of Mold Inserts by Laser–based Removal (A. Stephen, F. Vollertsen).
7. Micro–EDM for Mold Inserts (J. Schmidt, M. Knoll, T. Masuzawa).
8. Lithographic Fabrication of Mold Inserts (M. Guttmann, J. Schulz, V. Saile).
9. Material States and Surface Conditioning for Mold Inserts (Ch. Horsch, V. Schulze, D. Löhe).
III: Replication Techniques – Microinjection Molding.
10. Microinjection Molding – Principles and Challenges (R. Ruprecht, G. Finnah, V. Piotter).
11. Micro Metal Injection Molding (V. Piotter, L. Merz, G. Örlygsson, S. Rath, R. Ruprecht, B. Zeep).
12. Micro Ceramic Injection Molding (W. Bauer, J. Hausselt, L. Merz, M. Müller, G. Örlygsson, S. Rath).
Subject Index.

Nota biograficzna:
Prof. Dr.–Ing. Detlef Löhe studied mechanical engineering at the Technical University of Karlsruhe, Germany and obtained his Ph.D. in 1980. After heading the microstructure and mechancal behaviour working group there, he was appointed in 1991 as professor for materials science at Paderborn University, Germany, where he received an award for outstanding teaching achievements in 1994. In the same year, he returned to the Institute for Materials Science and Enginering I at Karlsruhe Technical University as its Director. He is Speaker of the Collaborative Research Centre 499 "Design, production and quality assurance of molded microparts constructed of metals and ceramics" and has been a Senator of the Deutsche Forschungsgemeinschaft (DFG) since 2003.
His research interests focus on metallic and ceramic materials properties and durability under different kinds of stress, component manufacture and behaviour, optimisation of heat treatment methods, and failure analysis.
Prof. Dr.–Ing. Jürgen Hauβelt studied Physics and Materials Sciences at the University of Erlangen, Germany. After his doctorate and a resea rch stay at Stanford University he joined Degussa AG in 1977, starting in metals research. After having worked as technical director in Degussa´s subsidiary in New York City, he returned to Germany in 1985 and was first in charge of metals research, then managed the entire materials development und process technology of Degussa´s corporate division "Metals". In 1993 he joined Forschungszentrum Karlsruhe as head of the Institute of Materials Research III. In addition, he was appointed professor at Freiburg University as Chair for Micromaterials Process Technology at IMTEK in 1996. In 1998 he became member of the supervisory board of Norddeutsche Affinerie AG, Hamburg.

Okładka tylna:
The gateway to the micro and nano worlds: AMN provides cutting–edge reviews and detailed case studies by top authors from science and industry, covering technologies, devices and advanced systems. Together, these have an immense innovative application potential that opens up with control of shape and function from the atomic level right up to the visible world without any technological gaps.
This and the following volume cover all angles of micro–scale parts and components engineering from both metallic and ceramic materials, a very promising field which is a strong source of innovation and development for micro process technology, aerospace applications, sensors, actors, medical and dental as well as many other applications.
In this volume, readers are introduced to this field and led from the design and modeling aspects to tooling, molds, and micro injection molding as a powerful replication technology.
From the Contents:
Design Environment and Design Flow
Modelling in Design
Modelling in Micro–PIM
Strategies for Manufacture of Mold Inserts
Micro End Milling in Hardened Steel
3D Microstructuring of Mold Inserts by Laser Removal
Micro–EDM of Mold Inserts
Lithographic Fabrication of Mold Inserts
M aterial States, Surface Conditioning
Micro Injection Molding: Principles and Challenges
Micro–MIM
Micro–CIM
Part II covers casting and forming techniques, automation, quality assurance, and component properties.